Experimental Study on Shape Separation of Particles by Using Radial Settling Characteristics through Stationary Liquid in Rotating Vessel

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Masunori Sugimoto¹  Ken-ichi Yamamoto¹ 

[1] Department of Materials Science and Engineering, Toyama University

关键词: Particle;    Wet Shape Separation;    Shape Correction Factor;    Stationary Liquid;    Rotating Vessel;   

DOI  :  10.1252/jcej.28.449

来源: Maruzen Company Ltd

【 摘 要 】

References(6)Cited-By(2)For the purpose of wet separation of particles differing in shape, particle settling characteristics have been investigated in a stationary liquid simultaneously subjected to centrifugal and gravitational forces. Several kinds of irregularly shaped particles were settled through viscous silicone oil at rest in a closed rectangular vessel rotated at low speeds. The settling trajectories of the particles in the liquid were measured in the laminar flow region. When the initial settling orientation of each particle was set in a given and appropriate direction, the radial settling displacement of the particle depended approximately on the particle shape, regardless of the size. By devising a simple feeding method, it was possible to make the initial settling orientation of particles automatically uniform. Continuous shape separation of particles in the liquid could be expected by applying a feeding method to the separation field receiving both centrifugal and gravitational forces as used in this paper.

【 授权许可】

Unknown