Control of Jet Impingement Heat Transfer by a Wake Flow behind an Array of Circular Cylinders

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Hiroki Kawasaki¹  Shinichi Hamano¹  Gong-Yang Li¹  Akira Onishi¹  Kunio Kataoka¹ 

[1] Department of Chemical Engineering, Kobe University

关键词: Heat Transfer Augmentation;    Impinging Jet;    Wake Flow;    Heat Transfer Control;    Circular Cylinders Array;   

DOI  :  10.1252/jcej.25.39

来源: Maruzen Company Ltd

【 摘 要 】

References(6)Cited-By(1)Local controllability of jet impingement heat transfer was investigated by immersing an array of circular cylinders within a slot jet. Heat transfer on the central stagnation line was augmented most effectively due to the acceleration and surface-renewal effects when the cylinder array was placed from four to six cylinder diameters upstream of the heat transfer surface in a ‘passing’ arrangement. The maximal point of heat transfer was shifted, without attenuation, to half the cylinder pitch off the jet axis on both sides by a ‘blocking’ arrangement whereas the central stagnation-line heat transfer was suppressed very much due to the blocking effect. The mechanism for augmentation of the stagnation-line heat transfer was explained successfully by the surface-renewal model proposed.

【 授权许可】

Unknown