CONVERSION OF SEWAGE SLUDGE TO HEAVY OIL BY DIRECT THERMOCHEMICAL LIQUEFACTION

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

TOMOKO OGI²  KATSUYA KOGUCHI²  SHIN-YA YOKOYAMA²  TADASHI NAKAMURA¹  AKIRA SUZUKI¹ 

[1] Central Research Laboratories, Japan Organo Co., Ltd.;National Research Institute for Pollution and Resources

关键词: Environment;    Liquefaction;    Thermochemical Conversion;    Sewage Sludge;    Heavy Oil;   

DOI  :  10.1252/jcej.21.288

来源: Maruzen Company Ltd

【 摘 要 】

References(9)Cited-By(19)To investigate optimum starting materials and catalyst loading for conversion of sewage sludge to heavy oil, various kinds of sewage sludges were liquefied at a temperature of 300°C, a pressure of 12 MPa, and a catalyst (sodium carbonate) loading of 0-20 wt %. The optimum kind of sewage sludge was found to be either raw primary sludge or raw mixed sludge because average oil yields of these sludges reached 43 %-higher than those of other kinds of sludges. For most sewage sludges, oil production proceeded satisfactorily without the addition of any catalyst.

【 授权许可】

Unknown