BRIDGING THE SNMP GAP: SIMPLE NETWORK MONITORING THE INTERNET OF THINGS

Facta Universitatis, Series: Electronics and Energetics

Mihajlo Savić¹ 

[1] University of Banja Luka, Faculty of Electrical Engineering, Republic of Srpska, Bosnia and Herzegovina$$

关键词: IoT;    monitoring;    SNMP;    CoAP;    MQTT;   

DOI  :  10.2298/FUEE1603475S

来源: University of Nis

【 摘 要 】

Things that form Internet of Things can vary in every imaginable aspect. From simplest devices with barely any processing and memory resources, with communication handled by networking devices like switches and routers to powerful servers that provide needed back-end resources in cloud environments, all are needed for real world implementations of Internet of Things. Monitoring of the network and server parts of the infrastructure is a well known area with numerous approaches that enable efficient monitoring. Most prevalent technology used is SNMP that forms the part of the IP stack and is as such universally supported. On the other hand, “things” domain is evolving very fast with a number of competing technologies used for communication and monitoring. When discussing small, constrained devices, the two most promising protocols are CoAP and MQTT. Combined, they cover wide area of communication needs for resource constrained devices, from simple messaging system to one that enables connecting to RESTful world. In this paper we present a possible solution to bridge the gap in monitoring by enabling SNMP access to monitoring data obtained from constrained devices that cannot feasibly support SNMP or are not intended to be used in such a manner.

【 授权许可】

Unknown