Molecularly imprinted polymer for 2, 4-dichlorophenoxyacetic acid prepared by a sol-gel method

Journal of Chemical Sciences

Yanli Sun1¹ 

[1] Department of Chemistry and Chemical Engineering, Heze University, Heze 274015, China$$

关键词: Molecular imprinting;    sol-gel;    2;    4-dichlorophenoxyacetic acid;    adsorption;   

DOI  :  

来源: Indian Academy of Sciences

【 摘 要 】

Based on a sol-gel procedure, a molecularly imprinted polymer (MIP) for 2, 4-dichlorophenoxyacetic acid (2, 4-D) was synthesized, using phenyltrimethoxysilane (PTMOS), aminopropyltriethoxysilane (APTES) as monomers and tetraethoxysilane (TEOS) as cross-linking agent. In addition to the amount of the template, some factors in the sol-gel process: TEOS/APTES/PTMOS molar ratio, H2O/Si molar ratio, CH3CH2OH/Si molar ratio, etc. were investigated in detail. Results show that the optimum conditions for the preparation of the MIPs were 20:1.5:1 (TEOS: APTES: PTMOS), ca. 4 (H2O/Si), ca. 4 (CH3CH2OH/Si), respectively. Effects of various parameters involved in the adsorption process of 2, 4-D on MIP such as incubation time, pH, etc. were also evaluated. It is found that the adsorption attained equilibrium within 3 h, the optimum pH for adsorption was about 7 and the adsorption obeyed Langmuir model. Test results also demonstrated that the present MIP for 2, 4-D had large adsorption capacity (the maximum adsorption concluded from Langmuir model reached 243.3 mg/g) and good selectivity.

【 授权许可】

Unknown