Case Study of the Characteristics and Dynamic Process of July 10, 2013, Catastrophic Debris Flows in Wenchuan County, China

Earth Sciences Research Journal

Jun, Li²  Javed Iqbal, Tanoli¹  Yong, You²  Ning-Sheng, Chen²  Gui-Sheng, Hu² 

[1] Institute of Mountain Hazards and Environment, Chengdu, China$$COMSATS Institute of Information Technology, Pakistan$$;Institute of Mountain Hazards and Environment, Chengdu, China$$

关键词: Debris flow;    dynamic process;    the block and burst characteristics;    prevention and cure measures.;   

DOI  :  10.15446/esrj.v20n2.48026

学科分类：天文学(综合)

来源: Universidad Nacional de Colombia * Departamento de Geociencias

【 摘 要 】

The Wenchuan earthquake of May 12, 2008, generated a significant amount of loose solid material that can produce devastating debris flows. In the five years since the earthquake, there have been many large-scale individual and group catastrophic debris flows that have caused lots of damage to the resettled population and the reconstruction efforts. The reconstructed towns of Yingxiu, Yinxing and Miansi have suffered debris flows and other secondary disasters in the past five years and are still not out of danger in the future. A debris-flow catastrophic event hit four towns of Wenchuan County along the Duwen Highway, part of China's National Highway 213, at midnight on July 10, 2013, following a local extreme rainfall of 176.2mm 24h-1. The debris flows occurred simultaneously along seven gullies. A total of 15000 people were affected due to the destruction of resettlement areas, factories, power stations, and houses. Because of this devastating event, traffic along the Duwen highway was completely disrupted during the disaster and recovery period. The present study focuses on the Lianshan Bridge debris flow gully; the disaster characteristics and cause of the debris flow were analyzed based on field investigations, remote sensing interpretation, and laboratory experiments. The particular dynamic parameters of the debris flow were calculated and analyzed including density, velocity, discharge, total volume and impact force. Also, the dynamic processes and changes that occurred in the debris flow were examined, and the block and burst characteristics of debris flow were studied based on statistical calculation and analysis dynamic characteristic parameters of debris flow. Finally, a program to prevent further debris flow was proposed according to the on-site investigation and based on the analysis of the features and dynamic processes of the debris flow.

【 授权许可】

Unknown