FOCUSING UNIDIRECTIONAL WAVE GROUPS ON FINITE WATER DEPTH WITH AND WITHOUT CURRENTS

Proceedings of the International Conference on Coastal Engineering

Dimitris Stagonas¹  Eugeny Buldakov²  Richard Simons³ 

[1] Research associate, Department of Civil & Environmental Engineering UCL;Lecturer, Department of Civil & Environmental Engineering UCL;Professor, Department of Civil & Environmental Engineering UCL

关键词: focused waves;    extreme waves;    waves on currents.;   

DOI  :  10.9753/icce.v34.waves.31

学科分类：建筑学

来源: Coastal Engineering Research Council

【 摘 要 】

Focused waves are often used in physical and numerical studies as a representative condition for extreme waves or as a mean to generate very steep and breaking waves at a desired location in space and time. A focused wave is in theory created when all the components in a transient wave group come in phase. In the past, linear wave theory and empirical iterative methodologies have been suggested in order to achieve the required phase and amplitude focusing. Nevertheless, their effectiveness decreases as the non-linearity of the wave group increases and thus the generation of very high focused waves was a challenging task. Here, an empirical iterative methodology is suggested which can focus waves of any height at a predetermined temporal and spatial location. The methodology has been successfully applied to wave groups travelling on still water but also on sheared currents and it has been implemented in both physical and numerical wave flumes. The results presented here refer to linear, weakly non-linear and strongly non-linear focused waves generated with a realistic target spectrum.

【 授权许可】

Unknown