KINEMATICS IN THE CRESTS OF STORM WAVES

Proceedings of the International Conference on Coastal Engineering

George Z. Forristall¹ 

[1] Shell Development Co.

关键词: wave kinematics;    storm waves;    wave crests;   

DOI  :  10.9753/icce.v20.%p

学科分类：建筑学

来源: Coastal Engineering Research Council

【 摘 要 】

Uncertainty about kinematics in the crests of high waves has prevented random wave simulation from being accepted as a reliable method for computing wave forces for platform design. A theoretically defensible method of calculation for wave crest kinematics has been developed recently. The method produces a potential function which fits the kinematic boundary condition specified by second order wave theory and is thus named the Kinematic Boundary Condition Fitting (KBCF) method. KBCF agreed well with measurements of mechanically generated irregular waves made by a laser Doppler current meter in a wave tank. In order to obtain further data during high, short crested storm waves, instruments for the Fulmar Wave Crest Kinematics (FULWACK) experiment were installed in the North Sea early in November 1981. During a storm later in that month, good velocity measurements at heights up to 25 feet above mean water level were obtained in over 30 waves. For comparison with this data, KBCF was extended to three dimensions. Statistics of the velocities thus simulated agreed well with statistics of the measurements. KBCF has thus been verified as a accurate method for simulating the kinematics of natural storm waves.

【 授权许可】

Unknown