Surface and Adsorption Properties of Activated Carbon Fabric Prepared from Cellulosic Polymer: Mixed Activation Method

Bulletin of the Korean chemical society

Surendra Bhati¹  O. N. Choubey¹  Savita Dixit¹  J. S. Mahur¹ 

关键词: Activated carbon fabric;    BET surface area;    Microporosity;    Pore size distribution;   

DOI  :  

学科分类：化学（综合）

来源: Korean Chemical Society

【 摘 要 】

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of CO2 as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and 925 °C), activation time (15, 30, 45 and 60 minutes) and CO2 flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and CCl4 onto ACF was investigated and both were found to correlate with surface area.

【 授权许可】

Unknown