Effects of hybrid composition of LCP and glass fibres on abrasive wear of reinforced LLDPE

Bulletin of materials science

S A R Hashmi¹  Navin Chand¹  Ajay Naik¹ 

[1] Regional Research Laboratory, Hoshangabad Road, Bhopal 462 026, India$$Regional Research Laboratory, Hoshangabad Road, Bhopal 462 026, IndiaRegional Research Laboratory, Hoshangabad Road, Bhopal 462 026, India$$

关键词: Hybrid composites;    abrasive wear;    LLDPE;    LCP fibre;    glass fibre.;   

DOI  :  

学科分类：材料工程

来源: Indian Academy of Sciences

【 摘 要 】

The hybrid of liquid crystalline polymer (LCP) fibres and glass fibres (GF) provide a combination of modulus and toughness to semi-crystalline linear-low-density-polyethylene (LLDPE). LCP and GF fibres reinforced composites were studied using two-body abrasion tester under different applied loads. Two sets of fibre reinforced LLDPE, 10 and 20 vol%, were investigated. The contents of LCP and glass fibres were varied as 25, 50, 75 and 100 vol% of overall volume of fibres in LLDPE. The effect of replacing glass fibre with LCP fibre on wear is reported. Wear loss increased with the applied loads and glass fibre contents in LLDPE. The replacements of glass fibres with LCP fibres improved abrasive wear resistance of composite. The composite containing 20 vol% of glass fibres in LLDPE showed the specific wear rate nearly double to that of LCP fibre reinforced LLDPE. Incorporation of LCP fibre improved wear resistance of glass fibre reinforced LLDPE. Worn surfaces were studied using SEM. Glass fibres were broken in small debris and removed easily whereas LCP fibres yielded to fibrillation during abrasive action. The overall wear rate was governed by the composition and test conditions.

【 授权许可】

Unknown