Effect of cooling rate during solidification on the hard phases of M23C6-type of cast CoCrMo alloy

Metalurgija

García-Duarte, J. H.²  Hernández-Rodríguez, M. A. L.²  Hernández-Rodríguez, A.¹  Benavides-Trevińo, J. R.²  Alvarez-Vera, M.¹  Juárez Hernández, A.² 

[1] COMIMSA - Corporación Mexicana de Investigación en Materiales SA de CV;Universidad Autónoma de Nuevo León, México

关键词: CoCrMo alloy;    cast;    solidification;    cooling rate;    microstructure;   

DOI  :  

学科分类：金属与冶金

来源: Hrvatsko Metalursko Drustvo

【 摘 要 】

Microstructural morphology of CoCrMo alloy by control of the cooling rate during the solidification was investigated. Samples were obtained using both an induction furnace for slow cooling rate and electric arc furnace for fast cooling...

【 授权许可】

Unknown