Steel Fibre Reinforced Concrete for Tunnel Lining – Verification by Extensive Laboratory Testing and Numerical Modelling

Acta Polytechnica

Matouš Hilar¹  Jaroslav Beňo¹ 

关键词: Steel fibre reinforced concrete;    segmental tunnel lining;    mechanical excavation;    laboratory testing;   

DOI  :  

来源: Czech Technical University in Prague, Faculty of M

【 摘 要 】

The use of precast steel fibre reinforced concrete (SFRC) for tunnel segments is a relatively new application of this material. It was first applied in Italy in the 1980s. However, it did not begin to be widely applied until after 2000. The Czech Technical University in Prague (CTU), together with Metrostav, carried out a study to evaluate the use of this new technology for tunnels in the Czech Republic. The first tests were carried out on small samples (beams and cubes) produced from SFRC to find an appropriate type and an appropriate dosage of fibres. The tests were also used to verify other factors affecting the final product (e.g. production technology). Afterwards, SFRC segments were produced and then tested at the Klokner Institute of CTU. Successful test results confirmed that it was possible to use SFRC segments for Czech transport tunnels. Consequently a 15 m-long section of segmental lining generated from SFRC without steel rebars was constructed as part of line A of the Prague metro.

【 授权许可】

Unknown