SIMPLIFIED PROCEDURE TO EVALUATE EARTHQUAKE-INDUCED RESIDUAL DISPLACEMENT OF GEOSYNTHETIC REINFORCED SOIL RETAINING WALLS

SOILS AND FOUNDATIONS

JUNICHI KOSEKI¹  KENJI WATANABE²  SUSUMU NAKAJIMA³  MASARU TATEYAMA² 

[1] Institute of Industrial Science, University of Tokyo;Railway Technical Research Institute;Public Works Research Institute

关键词: failure plane;    geosynthetic retaining wall;    Newmark's method;    residual displacement;    shaking table test;    (IGC: E12/E14/E8);   

DOI  :  10.3208/sandf.50.659

学科分类：建筑学

来源: Japanese Geotechnical Society / Jiban Kogakkai

【 摘 要 】

References(34)Based on a series of shaking table model tests, it was found that the effects of 1) subsoil and backfill deformation, 2) failure plane formation in backfill, and 3) pullout resistance mobilized by the reinforcements on the seismic behaviors of the geosynthetic reinforced soil retaining walls (GRS walls) were significant. These effects cannot be taken into account in the conventional pseudo-static based limit equilibrium analyses or Newmark's rigid sliding block analogy, which are usually adopted as the seismic design procedure. Therefore, this study attempts to develop a simplified procedure to evaluate earthquake-induced residual displacement of GRS walls by reflecting the knowledge on the seismic behaviors of GRS walls obtained from the shaking table model tests. In the proposed method, 1) the deformation characteristics of subsoil and backfill are modeled based on the model test results and 2) the effect of failure plane formation is considered by using residual soil strength after the failure plane formation while the peak soil strength is used before the failure plane formation, and 3) the effect of the pullout resistance mobilized by the reinforcement is also introduced by evaluating the pullout resistance based on the results from the pullout tests of the reinforcements. By using the proposed method, simulations were performed on the shaking table model test results conducted under a wide variety of testing conditions and good agreements between the calculated and measured displacements were observed.

【 授权许可】

Unknown