A low voltage highly linear CMOS up conversion mixer based on current conveyor

IEICE Electronics Express

Alireza Saberkari¹  Shahriar B. Shokouhi¹  Adib Abrishamifar¹ 

[1] Iran University of Science & Technology

关键词: current conveyor;    flipped voltage follower;    folded structure;    highly linear;    up conversion mixer;   

DOI  :  10.1587/elex.6.930

学科分类：电子、光学、磁材料

来源: Denshi Jouhou Tsuushin Gakkai

【 摘 要 】

References(13)Cited-By(1)This paper presents a low voltage highly linear CMOS up conversion mixer based on current conveyor (CCII), which converts an input of 100MHz IF signal to an output of 2.4GHz RF signal. The linearity of the designed mixer is greatly enhanced by utilizing a fully differential current conveyor. The flipped voltage follower (FVF) technique is applied for decreasing the current conveyor nonideality and the nonlinear output resistance of its buffer. Folded cascode structure has been used in the proposed mixer to achieve low supply voltage operation and separate biasing current of local oscillator (LO) switching and transconductance stages of mixer for decreasing the noise level of switching pairs. Full transistor level simulation results performed by Cadence in AMS 0.35µm CMOS technology reveal high linearity of the proposed mixer after a FOM-based comparison which has achieved up to 13.32dBm IIP3, -1.34dBm P-1dB and 96.7dBm IIP2 with a conversion gain of 4.2dB while consumes only 1.2mW at supply voltage of 1V.

【 授权许可】

Unknown