| IEICE Electronics Express | |
| Effect of coupling ratio on performance of self-excited Brillouin/erbium fiber laser | |
| Cheng Xiau San2  Sulaiman Wadi Harun1  Harith Ahmad2  | |
| [1] Faculty of Engineering, Multimedia University;Photonics Laboratory, Department of Physics, University of Malaya | |
| 关键词: optical fiber devices; optical fiber laser; self-excited BEFL; | |
| DOI : 10.1587/elex.1.460 | |
| 学科分类:电子、光学、磁材料 | |
| 来源: Denshi Jouhou Tsuushin Gakkai | |
PDF
|
|
【 摘 要 】
References(4)The operation of the self-excited Brillouin/erbium fiber laser (BEFL) is experimentally demonstrated. It uses a forward pumped erbium-doped fiber (EDF) as a gain medium to generate a Brillouin-pump and amplify the Stokes frequency signals generated in a single-mode fiber (SMF). The operating wavelength varies with changes of coupling ratio of the looping arm. The optimum BEFL operation is obtained with a center wavelength at 1567.5nm by looping back 20% of BEFL output into the other end of the SMF. A stable and strong BEFL comb of up to 16 lines with approximately 11 GHz line spacing are produced at the 980-nm pump power of 118mW. The self-excited BEFL has the potential to be used in the future dense wavelength division multiplexing communication system.
【 授权许可】
Unknown
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| RO201911300530529ZK.pdf | 208KB |
PDF