Triangulation of 3D Surfaces Recovered from STL Grids

Acta Polytechnica

Z. Bittnar¹  D. Rypl¹ 

关键词: 3D surface;    stereolithography format;    interpolating subdivision;    advancing front technique;   

DOI  :  

来源: Czech Technical University in Prague, Faculty of M

【 摘 要 】

In the present paper, an algorithm for the discretization of parametric 3D surfaces has been extended to the family of discrete surfaces represented by stereolithography (STL) grids. The STL file format, developed for the rapid prototyping industry, is an attractive alternative to surface representation in solid modeling. Initially, a boundary representation is constructed from the STL file using feature recognition. Then a smooth surface is recovered over the original STL grid using an interpolating subdivision procedure. Finally, the reconstructed surface is subjected to the triangulation accomplished using the advancing front technique operating directly on the surface. The capability of the proposed methodology is illustrated on an example. 

【 授权许可】

Unknown