PRELIMINARY EVALUATION OF A COMMERCIAL 360 MULTI-CAMERA RIG FOR PHOTOGRAMMETRIC PURPOSES

International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences

Teppati Losè, L.^1¹ 

[1] Politecnico di Torino, Dept. of Architecture and Design – Geomatics for Cultural Heritage Laboratory (LabG4CH), Italy^1

关键词: Calibration;    360 Images;    Multi-Camera system;    Cultural Heritage;    Photogrammetry;   

DOI  :  10.5194/isprs-archives-XLII-2-1113-2018

学科分类：地球科学(综合)

来源: Copernicus Publications

【 摘 要 】

The research presented in this paper is focused on a preliminary evaluation of a 360 multi-camera rig: the possibilities to use the images acquired by the system in a photogrammetric workflow and for the creation of spherical images are investigated and different tests and analyses are reported. Particular attention is dedicated to different operative approaches for the estimation of the interior orientation parameters of the cameras, both from an operative and theoretical point of view. The consistency of the six cameras that compose the 360 system was in depth analysed adopting a self-calibration approach in a commercial photogrammetric software solution. A 3D calibration field was projected and created, and several topographic measurements were performed in order to have a set of control points to enhance and control the photogrammetric process. The influence of the interior parameters of the six cameras were analyse both in the different phases of the photogrammetric workflow (reprojection errors on the single tie point, dense cloud generation, geometrical description of the surveyed object, etc.), both in the stitching of the different images into a single spherical panorama (some consideration on the influence of the camera parameters on the overall quality of the spherical image are reported also in these section).

【 授权许可】

CC BY