Plastic Waste Utilization as Asphalt Binder Modifier in Asphalt Concrete Pavement

International Journal of Information Technology

H. Naghawi ; R. Al-Ajarmeh ; R. Allouzi ; A. AlKlub ; K. Masarwah ; A. AL-Quraini ; M. Abu-Sarhan

关键词: Binder content modifier;    Marshall test;    plastic waste;    polyethylene terephthalate.;   

DOI  :  10.1999/1307-6892/10009245

学科分类：计算机应用

来源: World Academy of Science, Engineering and Technology (W A S E T)

【 摘 要 】

The main objective of this paper is to evaluate the use of plastic waste as a low cost asphalt binder modifier. For this purpose Marshall mix design procedure was used. Marshall mix design procedure seeks to select the Optimum Binder Content (OBC) to be added to a specific aggregate blend resulting in a mixture that satisfies the desired properties of strength and durability. In order to evaluate the plastic waste modified (PWM) asphalt mixtures, the OBC for the conventional asphalt mix was first identified, and then different percentages of crushed plastic waste by weight of the identified OBC were tested. Marshall test results for the modified asphalt mixtures were analyzed to find the optimum PWM content. Finally, the static indirect tensile strength (IDT) was determined for all mixtures using the splitting tensile test. It was found that PWM content of 7.43% by weight of OBC is recommended as the optimum PWM content needed for enhancing the performance of asphalt mixtures. It enhanced stability by 42.56%, flow by 89.91% and strength by 13.54%. This would lead to a more durable pavement by improving the pavement resistance to fatigue cracking and rutting.

【 授权许可】

Unknown