The possibility of extending work time of tribocouple welding improved stainless steel with improved carbon steel

Oradea University. Fascicle of Management and Technological Engineering. Annals

Vlatko Marušić¹ 

关键词: tribocouple;    welding;    stainless steel;    carbon steel;   

DOI  :  10.15660/AUOFMTE.2018-2.3389

学科分类：工程和技术（综合）

来源: Editura Universitatii din Oradea / University of Oradea Publishing House

【 摘 要 】

In the conditions of tribo-corrosion wear, extending of life time of parts can be achieved by using stainless steel, which is hardened to sufficiently high hardness. In the tribopair bolt/shell/slice of the bucket elevator transporter conveyor machine, the previously improved martensitic stainless steel for bolts is hardened at ≈ 45 HRC and welded with the improved high yield carbon steel for bolts. As the additional material, an electrode based on Cr-Ni-Mo (18/8/6) is used. The structure and hardness of welded samples are tested. On the tensile tester, resistance of the welded joint is tested with a simulated experiment. Dimensional control of wear of elements of tribopair was performed after six months in service. The analysis of test results showed that with regulated additional material and by applying the recommended welding parameters, the properties of the weld, which provide the necessary reliability of the joint in the conditions of tensile load, can be achieved, with a significant increase in the wear resistance of bolt.

【 授权许可】

Unknown