A Robust Test-Based Modal Model Identification Method for Challenging Industrial Cases

Proceedings

Patrick, Guillaume¹  Bart, Peeters²  Theo, Geluk³  Mahmoud, El-Kafafy⁴ 

[1] Author to whom correspondence should be addressed.;Mechanical Design Department, Helwan University, Cairo 11782, Egypt;Siemens Industry Software, Interleuvenlaan 68, B-3001 Leuven, Belgium;Vrije Universiteit Brussel (VUB). Pleinlaan 2, B-1050 Brussel, Belgium

关键词: modal analysis;    modal parameter identification;    modal model;   

DOI  :  10.3390/ICEM18-05196

学科分类：社会科学、人文和艺术（综合）

来源: mdpi

【 摘 要 】

In this paper, the MLMM modal parameter estimation method (Maximum Likelihood estimation of a Modal Model) and its new variant will be introduced. The MLMM method tackles some of the remaining challenges in modal analysis (e.g., modal analysis of highly-damped cases where a large amount of excitation locations is needed such as the modal analysis of a trimmed car body). Another big advantage of the MLMM method is its capability to fully integrate, within the estimated modal model, some important physical constraints, which are required for the intended applications, e.g., realness of the mode shape and FRFs reciprocity. More classical modal parameter estimation methods have rarely the possibility to fully integrate these constraints and the obtained modal parameters are typically altered in a subsequent step to satisfy the desired constraints. It is obvious that this may lead to sub-optimal results. The MLMM method uses the Levenberg-Marquardt optimization scheme to directly fit the modal model to the measured FRFs. The applicability of MLMM to estimate an accurate constrained modal model will be demonstrated using two challenging industrial applications.

【 授权许可】

CC BY