Auxetic Films with a Miniaturized Cellular Structure

Proceedings

Lanzara, Giulia¹  Chen, Yingjie² 

[1] Author to whom correspondence should be addressed.;Engineering Department, University of Rome, Roma Tre, 00146 Rome, Italy

关键词: cellular structure;    auxetic;    polymer;   

DOI  :  10.3390/ICEM18-05390

学科分类：社会科学、人文和艺术（综合）

来源: mdpi

【 摘 要 】

Auxetic materials represent a relatively new class of materials that are characterized by a cellular structure and a negative Poisson coefficient. Auxetics are extremely useful for morphing applications thanks to their synclastic deformation capability. Most of these materials have been developed with macro-scaled cellular units. However there are some applications (e.g., micro-air vehicles or biomedical applications) for which polymeric morphing materials need to be applied in relatively small areas. In these cases, a material scale reduction that leads to lightweight auxetic films with a miniaturized cellular structure could be of great interest. With this in mind, an experimental study was conducted to analyze the response of films that are characterized by a miniaturized cellular structure. The unit cells in this study were made of an aggregation of microwires and micronodes that were strategically interconnected to form auxetic expansions and contractions. The reduction in scale of the cellular units has a significant impact on the material characterization and properties. The response of polymeric micro-scaled cells is in fact here demonstrated to be strongly influenced by surface forces and dramatic changes in gaseous or liquid environment. This represents the most critical aspect and key variation when comparing these films with standard macro-auxetics. The extremely challenging (at this length-scale) fabrication and testing processes were optimized. Single cells, were thus successfully tested in different environments with programmed and digital micro-stages while being monitored under a microscope with a video camera. Digital image correlation techniques were used to highlight the deformation. The expansion/contraction process was found to be fully reversible after several cycles and at different deformation speeds.

【 授权许可】

CC BY