期刊论文详细信息
Materia
Deformation and fracture of an alpha/beta titanium alloy
Lobo, R.1  Morcelli, A.1  Andrade, A.1 
[1] Center for Materials Science and Technology, São Paulo, Brazil
关键词: α;    ;    titanium alloy;    Ti-6Al-4V;    transmission electron microscopy.;   
DOI  :  10.1590/S1517-70762010000200038
学科分类:工程和技术(综合)
来源: Universidade Federal do Rio de Janeiro * Coordenacao dos Programas de Pos-Graduacao de Engenharia
PDF
【 摘 要 】

Titanium alloys are used in the aero-spatial, energy and biomaterial industries among others and exhibit high specific strength and fracture toughness. Their mechanical properties show a strong dependence on the microstructure, especially on the size and morphology of the constituent phases. An experimental evaluation was done to a better understanding of that influence, using some techniques like as transmission electron microscopy (TEM), both low and high resolution (HR), scanning electron microscopy (SEM), coupled to electron back-scattering diffraction (EBSD), X-ray diffraction (XRD) and optical microscopy (OM). Some in-situ TEM deformation studies were also done. The alloy was submitted to two heat treatment conditions to get different phases distribution. An hcp phase (alpha) in coexistence with a bcc phase (beta) was observed after both treatments as well the occurrence of twins, stacking faults and dislocations arrangements. The work then, discusses the influence of these features on the overall alloy strength.

【 授权许可】

CC BY   

【 预 览 】
附件列表
Files Size Format View
RO201904285738200ZK.pdf 935KB PDF download
  文献评价指标  
  下载次数:6次 浏览次数:7次