Calculations of tramway track capacity in the wide area networks

Transport

Damian Gąska¹  Adam Molecki² 

[1] Faculty of Transport, Silesian University of Technology, ul. Krasińskiego 8, PL 40-019 Katowice, Poland;Roads and Maintenance Authority, ul. Długa 49, PL 53-633 Wrocław, Poland

关键词: tram;    capacity;    smoothness characteristics;    modeling;    simulation;    smoothness limiter;    tram stop;    junction;    single-track;    traffic lights;    travel time;    occurrence time;   

DOI  :  10.3846/16484142.2012.754378

学科分类：航空航天科学

来源: Vilnius Gedinimas Technical University

【 摘 要 】

The article shows a way of calculating the tram network capacity. A wide area network in Silesian Conurbation was used as an example (before and after planned modernization). Special attention was put on the traffic limiters like: single-track sections, stops, junctions, crossings with traffic lights, etc. Travel times and other characteristics were determined with the use of Monte Carlo method. In total, the capacity calculations of the tram network in Silesian Conurbation (divided into 74 sections) had taken into account: 131 crossings with traffic lights, 395 stops, 52 junctions, 51 single-track sections.

【 授权许可】

CC BY