Processing of a duplex stainless steel by equal channel angular extrusion

Materia

Cintho, O.M.¹  Farias, F.A.¹  Pontes, M.J.H.¹ 

[1] State University of Ponta Grossa

关键词: Duplex;    ECAP;    stainless steel.;   

DOI  :  10.1590/S1517-70762010000200036

学科分类：工程和技术（综合）

来源: Universidade Federal do Rio de Janeiro * Coordenacao dos Programas de Pos-Graduacao de Engenharia

【 摘 要 】

A UNS S32205 duplex stainless steel was processed by ECAE in three different velocities, at room temperature, and heat treated in different temperatures and times to evaluate recrystallization. Attrition forces promoted great deformation heterogeneity in the samples sections, with hardness increase, and morphology changes in the grains and changing orientation through the processed samples. In treated samples surface, two types of distinct structures was formed, with surfaces positioned in 90º and 120º angles, probably because the annihilation of pilled dislocations in ferrite based centered cubic structure and austenite face centered cubic structure, respectively. The induced martensite by cold deformation was also observed. Some samples demonstrate located points of recrystallization in grain boundaries for some treatment conditions, the number of recrystallization nuclei increased with the increase of treatment time.

【 授权许可】

CC BY