Moisture movement in cement-based repair systems monitored by X-ray absorption

Heron

M. Luković¹ 

[1]Delft University of Technology, the Netherlands

关键词: X-ray absorption;    water movement;    repair system;   

DOI  :  

学科分类：建筑学

来源: Technische Universiteit Delft * Faculty of Civil Engineering

【 摘 要 】

Preliminary studies are performed first to determine the absorption rate of a two-year-old mortar substrate. Cumulative water absorption and the penetration front of water are monitored as a function of time. Furthermore, absorption by the mortar substrate is investigated when a repair material is cast on top. Influence of water-to-cement ratio (w/c) of the repair material on water exchange, and moisture content change during drying in the repair system are studied. Ordinary Portland cement (OPC) paste was used as a repair material. It was shown that, initially, water from the repair material is absorbed by the substrate with the same speed as “free” water. Furthermore, not only can water be absorbed by the substrate, but it can also migrate back from the substrate to the repair material due to hydration of the repair material. Quantifying the dynamics of water exchange at an early stage between the repair material and the concrete substrate is a first step towards understanding the development of material and interface properties in repair systems. This can provide engineers with recommendations about substrate preconditioning in experiments and field practice.

【 授权许可】

CC BY