The influence of natural clay and organoclay vermiculite on the formation process of bionanocomposites with poly (3-hydroxybutyrate-co-3-hydroxyvalerate)

Materia

Alves, Tatianny Soares²  Oliveira, Thainá Araújo de²  Barbosa, Renata³  Carvalho, Laura Hecker de⁴  Reis, Dilson Cristino da Costa⁴ 

[1] UFCG, Campina Grande, Brazil;UFPI, Teresina, Brazil;Federal University of Campina Grande —Federal University of Piauí —

关键词: bionanocomposites;    polymeric composites;    polymers;    FTIR and X-ray technique.;   

DOI  :  10.1590/s1517-707620170004.0220

学科分类：工程和技术（综合）

来源: Universidade Federal do Rio de Janeiro * Coordenacao dos Programas de Pos-Graduacao de Engenharia

【 摘 要 】

During the last decades, a lot of research work focused on several biodegradable and biosourced polyesters for the purpose of reducing the non-degradable polymer wastes. These polyesters are particularly considered to be promising polymers for biomedical applications and short life-time products like packaging. As these packagings are rapidly discarded, especially the food ones, their accumulation becomes a serious environmental problem. In order to replace these materials with new ones that do not harm the environment, several studies are being carried out about these materials. However, it presents some limitations as its thermal instability in the molten state and high cost of production, being the incorporation of clay to the polymer matrix, forming bionanocomposites, a viable alternative since it improves the mechanical and thermal properties of the material when compared to the pure polymer, and may or may not reduce the total cost of production. Among commercially-available polyesters, polyhydroxyalkanoates (PHAs) are produced by various bacteria and known to be fully biodegradable. The aim of this study was to develop and to characterize bionanocomposites produced from the polymer matrix of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) - PHBV and natural vermiculite and organoclay. The melt intercalation technique was used for obtaining systems in the form of films. The FTIR results unveiled changes in the bionanocomposites structure with the addition of the clay, verifying the incorporation and overlap of bands of both the natural clay and the quaternary ammonium salt. Through the XRD technique, it was observed a greater disorganization in the systems compared to the pure polymer, suggesting a structure of a microcomposite for the systems with natural clay and tending to a greater exfoliation for the systems with organoclay vermiculite. From the micrographs by MO and MEV, the films presented a small number of clusters for the natural systems and a more uniform structure for the organophilic systems, thus corroborating with the XRD. In this way, it was evidenced that the systems with organoclay were the ones that presented better against the characteristics desired for its possible industrial application. Thus, elaborated bionanocomposites may be an alternative to the substitution of synthetic polymers in the industry, for example, in food packaging.

【 授权许可】

CC BY