Application of ceramic coating to improve abrasive wear resistance of die inserts used to press-mould stampings of refractories

Metalurgija

Mróz, M.¹  Tupaj, M.¹  Kupiec, B.¹  Orłowicz, A. W.¹  Kij, T.²  Kozak, L.² 

[1] Department of Casting and Welding, Rzeszow University of Technology, Rzeszow, Poland;Zakłady Magnezytowe ”ROPCZYCE” S.A., Ropczyce, Poland

关键词: ceramic coating;    abrasive wear resistance;    high chromium cast iron;    microstructure;    refractories;   

DOI  :  

学科分类：金属与冶金

来源: Hrvatsko Metalursko Drustvo

【 摘 要 】

The paper presents results of a study on abrasive wear resistance of die inserts for composite moulds used to pressmould stampings from refractory materials, determined based on susceptibility to scratching with a diamond indenter. For the study, two inserts of high-chromium cast iron were prepared, of which one was provided with a ceramic coating (60 % Al2O3 + 40 % TiO2) with a metallic interlayer (NiAlCrSi). Both layers were deposited by means of the Atmospheric Plasma Spraying (APS) method. The obtained scratch test results indicate that with the use of the same load force (20 N), die inserts with ceramic coating are characterized with less indenter penetration depth which should translate to higher resistance to abrasive wear.

【 授权许可】

CC BY