Role of the Continuous Casting Forms on the Shape of the Solidified Crust / Wpływ Geometrii Formy Na Kształt Frontu Krzepnięcia Przy Odlewaniu Ciągłym

Archives of Metallurgy and Materials

K. Pantoł¹  Z. Lipnicki² 

[1] STATE HIGHER VOCATION SCHOOL IN G?OGÓW, 67-200 G?OGÓW, POLAND;UNIVERSITY OF ZIELONA GÓRA, INSTITUTE OF ENVIRONMENTAL ENGINEERING, 65-516 ZIELONA GÓRA, POLAND

关键词: Keywords: continuous casting;    solidification stationary front;    shape of crust;    contact layer;   

DOI  :  10.1515/amm-2015-0413

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

An analytical model for the transfer has been development and applied for calculating the shape of the solid thickness profile for continuous casting of a thin plate as an example. The stationary solidification front relative to the crystallizer was received from the superposition of the motions of the liquid metal flow in the axial direction and the solidifying metal in the perpendicular direction. The shape of the solidified crust was analyzed for different casting forms. The results are compared and graphically shown for different selected forms.

【 授权许可】

Unknown