Influence of Aluminium Alloy Anodizing and Casting Methods on Structure and Functional Properties

Archives of Metallurgy and Materials

M. Polok-Rubiniec¹  A. Włodarczyk-Fligier¹  J. Konieczny¹  K. Labisz¹ 

[1] Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, 18A Konarskiego Str., 44-100 Gliwice, Poland

关键词: Keywords: Anodization;    Surface Treatment;    Alumina;    Al2O3 layer;    Aluminium alloys;    Wear resitance;   

DOI  :  10.1515/amm-2016-0220

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

This paper presents the influence of casting method and anodic treatment parameters on thickness and structure of an anodic layer formed on aluminium alloys. As test materials was used the aluminium alloy AlSi9Cu3, which was adopted to the casting process and anodic treatment. In this paper are presented the wear test results and metallographic examination, as well as hardness of non-anodised and anodised alloys subjected to anodising process.

【 授权许可】

Unknown