Surface modification of AZ91 magnesium alloy using GTAW technology

Bulletin of the Polish Academy of Sciences. Technical Sciences

K. Kud?aCz?stochowa University of Technology, Department of Welding, 21 Armii Krajowej St., 42-200 Cz?stochowa, PolandOther articles by this author:De Gruyter OnlineGoogle Scholar¹  J. IwaszkoCorresponding authorCz?stochowa University of Technology, Institute of Materials Engineering, 19 Armii Krajowej St., 42-200 Cz?stochowa, PolandEmailOther articles by this author:De Gruyter OnlineGoogle Scholar²  M. StrzeleckaCz?stochowa University of Technology, Institute of Materials Engineering, 19 Armii Krajowej St., 42-200 Cz?stochowa, PolandOther articles by this author:De Gruyter OnlineGoogle Scholar² 

[1]Cz?stochowa University of Technology, Department of Welding, 21 Armii Krajowej St., 42-200 Cz?stochowa, Poland

[2]Cz?stochowa University of Technology, Institute of Materials Engineering, 19 Armii Krajowej St., 42-200 Cz?stochowa, Poland

关键词: Keywords: remelting treatment;    GTAW technology;    AZ91 magnesium alloy;   

DOI  :  10.1515/bpasts-2017-0099

学科分类：工程和技术（综合）

来源: Polska Akademia Nauk * Centrum Upowszechniania Nauki / Polish Academy of Sciences, Center for the Advancement of Science

【 摘 要 】

In this study, surface remelting treatment of the AZ91 magnesium alloy by means of welding using a non-consumable electrode in an inert gas shield was carried out. Three variants of surface treatment were used, i.e. the single torch variant with a single heat source without cooling down the samples, the single torch variant with a single heat source and a cooling system with liquid nitrogen, and the double welding torch variant with a double heat source in the torches operating in a tandem configuration. Experimental verification of the applied apparatus solutions was based on both macro- and microstructural assessment of the obtained effects. Comparative analysis of the variants used and the obtained microstructural results allowed the authors to indicate the deficiencies and limitations of particular solutions and to single out the best solution that would be useful for modifying the surface layers of magnesium alloys, as well as other materials having a strong oxygen affinity.

【 授权许可】

Unknown