Sensitivity Analysis of Buckling Loads of Bisymmetric I-Section Columns with Bracing Elements / Analiza Wrazliwosci Siły Krytycznej Słupa Cienkosciennego Ze Stezeniami

Archives of civil engineering

P. IwickiUniversity of Technology, Faculty of Civil and Environmental Engineering, Department of Structural Mechanics and Bridges, Gdansk, PolandEmailOther articles by this author:De Gruyter OnlineGoogle Scholar¹ 

[1] University of Technology, Faculty of Civil and Environmental Engineering, Department of Structural Mechanics and Bridges, Gdansk, Poland

关键词: Keywords: Sensitivity analysis;    thin-walled beam;    stiffener;    critical load;   

DOI  :  10.2478/v.10169-010-0004-y

学科分类：建筑学

来源: Polska Akademia Nauk * Instytut Podstawowych Problemow Techniki / Polish Academy of Sciences, Institute of Fundamental Technological Research

【 摘 要 】

The first order variation of critical loads of thin-walled columns with bisymmetric open cross-section due to some variations of the stiffness and location of bracing elements is derived. The considerations are based on the classical linear theory of thin-walled beams with non-deformable cross-section introduced by Vlasov [1]. Both lateral braces and braces that restraint warping and torsion of the cross-section have been taken into account. In the numerical examples dealing with I-column, the functions describing the influence of location of the braces with unit stiffness on the critical load of torsional and flexural buckling are derived. The linear approximation of the exact relation of the critical load due to the variation of the stiffness and location of braces is determined.

【 授权许可】

Unknown