Analysis of Plastic Strain Localization on the Basis of Strain and Temperature Fields / Analiza Lokalizacji Odkształcenia Plastycznego Na Podstawie Pola Odkształceń I Pola Temperatury

Archives of Metallurgy and Materials

W. Oliferuk¹  M. Maj¹ 

[1] INSTITUTE OF FUNDAMENTAL TECHNOLOGICAL RESEARCH POLISH ACADEMY OF SCIENCES, WARSAW, POLAND

关键词: Keywords: plastic strain localization;    Strain field;    Temperature field;    Infrared thermography;    Heat transfer;   

DOI  :  10.2478/v10172-012-0124-2

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

In the present paper the onset of plastic strain localization was determined using two independent methods based on strain and temperature field analysis. The strain field was obtained from markers displacement recorded using visible light camera. In the same time, on the other side of the specimen, the temperature field was determined by means of infrared camera. The objective of this work was to specify the conditions when the non-uniform temperature distribution can be properly used as the indicator of plastic strain localization. In order to attain the objective an analysis of strain and temperature fields for different deformation rates were performed. It has been shown, that for given experimental conditions, the displacement rate 2000 mm/min is a threshold, above which the non-uniform temperature distribution can be used as the indicator of plastic strain localization.

【 授权许可】

Unknown