Development of low-power loss Mn–Zn ferrites using microwave sintering method

Bulletin of Materials Science

关键词: Ferrites;    microwave sintering;    conventional sintering;    power loss;    hysteresis loss;    eddy current loss;    transformer;    high frequency applications.;   

学科分类：材料工程

来源: Indian Academy of Sciences

【 摘 要 】

Microwave sintering (MS) method has been successfully used for densifying Mn–Zn ferrites used for high frequency applications. This method needs only a short time to obtain high density when compared to conventionally sintered (CS) Mn–Zn ferrites. The lowest power loss was also achieved at 100 kHz and 200 mT condition for the microwave sintered samples. Conductor-embedded ferrite transformers were constructed using CS and MS samples and output power, efficiency, and surface rise of temperature were measured at sinusoidal voltage of 25 V with frequency, 1 MHz. The efficiency and surface rise of temperature of transformer were found to be high and low, respectively.

【 授权许可】

CC BY