The Analysis of Stress States in Steel Rods Surfaced by Welding

Archives of Metallurgy and Materials

J. Winczek¹ 

[1] CZESTOCHOWA UNIVERSITY OF TECHNOLOGY, INSTITUTE OF MECHANICS AND MACHINE DESIGN FOUNDATIONS, 73 DABROWSKI STR., 42-200 CZESTOCHOWA, POLAND;

关键词: Keywords : Phase transformation;    Residual welding stresses;    Stress measurement;    Surfacing;   

DOI  :  10.2478/amm-2013-0157

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

In work is presented a method of calculating elasto-plastic states in thermally loaded rods, which takes into account phase transformations that occur during surfacing by welding. Kinetics of phase transformations during heating and cooling is limited by temperature values at the beginning and at the end of austenitic transformation, while the progress of phase transformations during cooling is determined on the basis of TTT-welding diagram, basing on Johnson-Mehl-Avrami-Kolomogorov law for diffusional transformations and Koistinen-Marburger for martensitic transformation. Stress state of a bar subjected to thermo-mechanical loads is described assuming the planar cross section hypothesis and using integral equations of stress equilibrium of a bar as well as simple Hook’s law. Dependence of stresses from strains is assumed on the basis of tensile curves of particular structures, taking into account the influence of temperature. Computations of strains and stresses are investigated in a rod made of S235 steel, loaded by thermal fields generated by a point welding heat source of different intensities. The analysis of origination and development of plastic strains is carried out. In order to verify correctness of the model, experimental tests are carried out on a rod made of S235 steel surfaced with GMA method with geometry and welding parameters assumed in numerical simulations. Residual stresses, calculated taking into account phase transformations and for homogenous material model, are compared with experimental results.

【 授权许可】

Unknown