Identification of Yield Point of Polymer-Based Composite Material in the Conditions of Increased Temperatures

Archives of Metallurgy and Materials

A. Arustamian¹  D. Kalisz¹  K. Sołek² 

[1] AGH - University of Science and Technology, Faculty of Foundry Engineering, 30 Mickiewicza Av., Krakow 30-059 Kraków Poland;AGH - University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, 30 Mickiewicza Av., Krakow, 30-059 Kraków Poland

关键词: Keywords: mechanical properties;    yield point;    compression test;    composite material;   

DOI  :  10.1515/amm-2016-0255

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

Theoretical and practical research on the influence of temperature on mechanical characteristics of the composite material MM “Steel 1018” has been conducted. Both laboratory equipment used to measure of mechanical properties, the technique of material preparation and the experimental procedure were described. The analysis of the the obtained results revealed that with temperature increase the material yield point goes down.

【 授权许可】

Unknown