Integrated Recycling Process of Matrices of Organic Moulding Sands

Archives of Metallurgy and Materials

R. Dańko¹ 

[1] AGH UNIVERSITY OF SCIENCE AND TECHNOLOGY, FACULTY OF FOUNDRY ENGINEERING, REYMONTA ST. 23, 30-059 KRAKÓW, POLAND;

关键词: Keywords: moulding sand;    self-setting sand;    recycling system;    reclamation;   

DOI  :  10.2478/amm-2013-0076

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

The idea and experimental verification of assumptions of the integrated recycling process of matrices of uniform self-hardening moulding sands with synthetic resins, leading to obtaining moulding sands matrix of expected quality - is presented in the hereby paper. The basis of the presented process constitutes a combination of the method of forecasting averaged ignition losses of moulding sands after casting and defining the range of necessary matrix reclamation treatments in order to obtain its full recycling. Simultaneously, the empirically determined dependence of dusts amounts emitted during the reclamation process of the matrix from the given spent sand on the ignition loss values (which is the most proper assessment index of the obtained reclaimed material quality) was taken into account. The special experimental stand for investigations of the matrix recycling process was one of the elements of the conceptual approach and verification of its assumptions. The stand was equipped with the system of current on-line control of the purification degree of matrix grains from organic binder remains. The results of own investigations, allowing to combine ignition loss values of spent moulding sands after casting knocking out with amounts of dusts generated during the mechanical reclamation treatment of such sands, were utilized in the system.

【 授权许可】

Unknown