Tribological Properties of Steel/Tib2 Composites Prepared by Spark Plasma Sintering/ Własności Tribologiczne Kompozytów Stal/Tib2 Otrzymywanych Metodą Sps

Archives of Metallurgy and Materials

I. Sulima¹ 

[1] INSTITUTE OF TECHNOLOGY, PEDAGOGICAL UNIVERSITY OF CRACOW, 2 PODCHORAZYCH STR., 30-084 KRAKÓW, POLAND;

关键词: Keywords: ball-on-disc method;    friction coefficient;    wear rate;    composites;    Spark Plasma Sintering (SPS);   

DOI  :  10.2478/amm-2014-0216

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

mechanical and tribological properties of sintered 316L stainless steel composites with TiB2 submicroparticles were investigated. The composites were manufactured by Spark Plasma Sintering (SPS). The wear behaviour was studied by using a ball-on-disc wear tester at room temperature. The worn surface were analysed using Scanning Electron Microscopy (SEM). The results indicated that the friction coefficient and the wear resistance of composites with the same content of TiB2 particles depend on the sintering conditions.

【 授权许可】

Unknown