Towards good practice guidelines for the contour method of residual stress measurement

The Journal of Engineering

Jan Kowal¹  Foroogh Hosseinzadeh¹  Peter John Bouchard¹ 

[1] Engineering and Innovation Department, The Open University, Walton Hall, Milton Keynes MK7 6AA, UK

关键词: deformed cut surface;    robust analysis;    contour method;    metallic components;    residual stress measurement;    deformation contour measurement;   

DOI  :  10.1049/joe.2014.0134

学科分类：工程和技术（综合）

来源: IET

【 摘 要 】

Accurate measurement of residual stress in metallic components using the contour method relies on the achievement of a good quality cut, on the appropriate measurement of the deformed cut surface and on the robust analysis of the measured data. There is currently no published standard or code of practice for the contour method. As a first step towards such a standard, this study draws on research investigations addressing the three main steps in the method: how best to cut the specimens; how to measure the deformation contour of the cut surface; and how to analyse the data. Good practice guidance is provided throughout the text accompanied by more detailed observations and advice tabulated in Appendix.

【 授权许可】

CC BY