Starch/poly (butylene adipate-co-terephthalate)/montmorillonite films produced by blow extrusion

Quimica nova

Muller, Carmen M. O.¹  Yamashita, Fabio¹  Mali, Suzana¹  Santos, Rodrigo A. L.¹  Grossmann, Maria V. E.¹ 

[1] Universidade Estadual de Londrina, Londrina, Brasil

关键词: biodegradable films;    nanoclays;    intercalated nanocomposites.;   

DOI  :  10.5935/0100-4042.20140170

学科分类：化学（综合）

来源: Sociedade Brasileira de Quimica

【 摘 要 】

This study aims to prepare biodegradable films from cassava starch, poly (butylene adipate-co-terephthalate) (PBAT), and montmorillonite (MMT) using blow-extrusion process and analyze the effects of different types and concentrations of MMT on the microstructure, physicochemical, and mechanical properties of the resulting films. The films were produced by blending 30% of PBAT with glycerol (17.5%), starch (49.0-52.5%), and four different types of montmorillonite (Cloisite® Na+, 10A, 15A, and 30B) at two different concentrations (1.75% and 3.5%). All the films prepared in this study showed an increase in the basal spacing of MMT layers. In particular, the films with 10A and 30B showed the highest increase in intercalation basal spacing, suggesting the formation of intercalated composites. The addition of nanoclays decreased the elongation of films. The addition of Cloisite® 10A resulted in films with the lowest WVP values and the highest stability to water adsorption under different RH conditions.

【 授权许可】

CC BY