CFD modeling of the melt spinning of poly (ethylene terepthalate) at low take-up velocities

Scientific Research and Essays

Sengul Teke¹ 

关键词:  ;    Melt spinning;    poly (ethylene terepthalate);    modeling;    process parameters.;   

DOI  :  10.5897/SRE11.1350

学科分类：社会科学、人文和艺术（综合）

来源: Academic Journals

【 摘 要 】

In this study, a model was formulated to describe the melt spinning of Poly (ethylene terepthalate) (PET) at different quench air speeds and temperatures, mass throughputs and a low range of take-up velocities. The constitutive equations of the Newtonian model were used for modeling, which assumed the flow of polymer was viscous. To simulate the influence of the process parameters on the melt spinning process, a fiber model was used and coupled with computational fluid dynamics (CFD) calculations of the quench air flow. In the fiber model, energy, momentum and mass balance were solved for the polymer mass flow. The formulation was implemented in the Fluent Continuous Fiber Model. Numerical predictions of the model were compared with experimental data reported in the literature for PET.The take up speed, mass throughput and the temperature of melt spinning were the primary parameters of final fiber properties for both simulation and experimental results. In the simulation results, the effects of take-up speed and mass throughputs were clearly different at high take-up velocities and low mass throughputs because of viscoelastic behavior of polymers in the melt spinning.The Newtonian model was more reasonable for lower take-up speeds and higher mass throughputs.

【 授权许可】

CC BY