Advanced System Identification for High-Rise Building Using Shear-Bending Model

Frontiers in Built Environment

Takewaki, Izuru¹  Fujita, Kohei¹ 

[1] Department of Architecture and Architectural Engineering, Graduate School of Engineering, Kyoto University, Japan

关键词: system identification;    High-rise building;    Shear-bending model;    Micro-tremor input;    ARX model;    Identification function;   

DOI  :  10.3389/fbuil.2016.00029

学科分类：建筑学

来源: Frontiers

【 摘 要 】

In order to identify physical model parameters of a high-rise building, a new story stiffness identification method is presented based on a shear-bending model and the identification function. Although a shear building model may be the simplest conventional model for representing tall buildings, the system identification (SI) method using that model is not necessarily appropriate. This is because the influence of bending deformation is predominant in such high-rise buildings. For this reason, a shear-bending model is used where the shear and bending stiffnesses are unknown. In the previous researches using the shear-bending model, it was difficult to identify the bending stiffnesses stably and reliably. In this paper, to overcome such instability of bending stiffness identification of the shear-bending model, a new SI algorithm using both the shear model and the shear-bending model is presented. The proposed SI algorithm is based on the observation that the fundamental-mode shape of the identified shear model is similar to that of the shear-bending model identified in the previous SI method. In order to verify the advanced SI method, two different 20-story building models are investigated in the numerical simulations. From the results of the simulations, both the shear and bending stiffnesses of the shear-bending model are identified reliably and stably in the proposed SI method.

【 授权许可】

CC BY