Comparison of surface roughness of nanofill and nanohybrid composite resin polished by aluminum oxide and diamond particle paste

Padjadjaran Journal of Dentistry

Opik Taofik Hidayat¹  Dudi Aripin¹  Yolanda Y.¹ 

[1] Universitas Padjadjaran

关键词: Polishing;    nanofill;    nanohybrid;    Aluminium oxide;    diamond;   

DOI  :  10.24198/pjd.vol29no2.13659

学科分类：口腔科学

来源: Universitas Padjadjaran

【 摘 要 】

Introduction:The adequate finishing and polishing procedures might occur the restoration longivity, the color retention, and the good integrating with the surrounding environment.Methods:This study was conducted to determine the surface roughness of the nanofill composite with the nanohybrid composite polished by the aluminum oxide pastes and diamond polishing paste. This study was a pure experimental-in vitro study. The results of polishing on the resin composite surfaces was observed using the optical microscope at 500x magnification and given the score. The Krusskal-Wallis test was conducted to depict the data analysis.Result:The results showed that the resin composite group of the nanohybrid polished by both aluminum oxide and diamond particle had smoother surface than the resin composite of the nanofill.Conclusion:The conclusions of this study depicted that there were differences of polishing results using the aluminium oxide and diamond particle paste between the nanofill and nanohybrid resin composite surface roughness.

【 授权许可】

CC BY