期刊论文详细信息
ETRI Journal
Sustainable Vibration Energy Harvesting Based on Zr-Doped PMN-PT Piezoelectric Single Crystal Cantilevers
关键词: cantilever;    piezoelectric;    PMN-PZT;    Vibration energy harvesting;   
Others  :  1185741
DOI  :  10.4218/etrij.09.1209.0015
PDF
【 摘 要 】

In this paper, we present the results of a preliminary study on the piezoelectric energy harvesting performance of a Zr-doped PbMg1/3Nb2/3O3-PbTiO3 (PMN-PZT) single crystal beam. A novel piezoelectric beam cantilever structure is used to demonstrate the feasibility of generating AC voltage during a state of vibration. The energy-harvesting capability of a PMN-PZT beam is calculated and tested. The frequency response of the cantilever device shows that the first mode resonance frequency of the excitation model exists in the neighborhood of several hundreds of hertz, which is similar to the calculated value. These tests show that several significantly open AC voltages and sub-mW power are achieved. To test the possibility of a small scale power source for a ubiquitous sensor network service, energy conversion and the testing of storage experiment are also carried out.

【 授权许可】

   

【 预 览 】
附件列表
Files Size Format View
20150520114045420.pdf 743KB PDF download
【 参考文献 】
  • [1]J.A. Stankovic, "When Sensor and Actuator Networks Cover the World," ETRI J., vol. 30, no. 5, 2008, pp. 627-33.
  • [2]S. Maeng et al., "SOI CMOS-Based Smart Gas Sensor System for Ubiquitous Sensor Networks," ETRI J., vol. 30, no. 4, 2008, pp. 516-525.
  • [3]H.K. Lee et al., "Electroactive Polymer Actuator for Lens-Drive Unit in Auto-Focus Compact Camera Module," ETRI J., vol. 31, no. 6, Dec. 2009, pp. 695-702.
  • [4]J.A. Paradiso and T. Starner, "Energy Scavenging for Mobile and Wireless Electronics," IEEE Pervasice Comput., vol. 4, 2005, pp. 16-27.
  • [5]S. Roundy and P.K. Wright, "A Piezoelectric Vibration Based Generator for Wireless Electronics," Smart Mater. Struct., vol. 13, 2004, pp. 1131-1142.
  • [6]S.R, Anton and H.A. Sodano, "A Review of Power Harvesting Using Piezoelectric Materials," Smart Mater. Struct., vol. 16, 2007, pp. R1-21.
  • [7]J. Kim, "Formation of a Porous Silicon Anti-reflection Layer for a Silicon Solar Cell," J. Korean Phys. Soc., vol. 50, 2007, pp. 1168-1171.
  • [8]S.P. Beeby, M.J. Tudor, and N.M. White, "Energy Harvesting Vibration Sources for Microsystems Applications," Meas. Sci. Technol., vol. 17, 2006, pp. R175-195.
  • [9]M.Y. Kim, T.S. Oh, and J.S. Kim, "Annealing Behavior of Bi2Te3 Thermoelectric Semiconductor Electrodeposited for Nanowire Applications," J. Korean Phys. Soc., vol. 50, 2007, pp. 670-676.
  • [10]Y.K. Hong and K.S. Moon, "Single Crystal Piezoelectric Transducers to Harvest Vibration Energy," Proc. SPIE, vol. 6048, 2005, pp. 60480E-1-3.
  • [11]A. Badel et al., "Single Crystals and Nonlinear Process for Outstanding Vibration-Powered Electrical Generators," IEEE Trans. Ultrason., Ferroelectr., Freq. Control, vol. 53, no. 4, 2006, pp. 673-684.
  • [12]S. Roundy, P.K. Wright, and J. Rabaey, "A Study of Low Level Vibrations as a Power Source for Wireless Sensor Nodes," Comput. Commun., vol. 26, 2003, pp. 1131-1144.
  • [13]V.H. Schmidt, "Theoretical Electric Power Output per Unit Volume of PVF2 and Mechniacl-to-Electrical Conversion Efficiency as Functions of Frequency," Proc. the 6th IEEE Int. Symp. Appl. Ferroelectr., 1986, pp. 538-542.
  • [14]J. Ajitsaria et al., "Modeling and Analysis of a Bimorph Piezoelectric Cantilever Beam for Voltage Generation," Smart Mater. Struct., vol. 16, 2007, pp. 447-454.
  • [15]J.H. Cho et al., "Generated Power Characterization of Piezoelectrics with Electromechanical Coupling Coefficient and Quality Factor," IEEE Ultrason. Symp., 2006, pp. 485-488.
  • [16]J. Twiefel et al., "Power Output Estimation and Experimental Validation for Piezoelectric Energy Harvesting Systems," J. Electroceramics, vol. 20, 2008, pp. 203-208.
  • [17]A. Erturk and D.J. Inman, "On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters," J. Intell. Mater. Syst. and Structures, vol. 19, 2008, pp. 1311-1325.
  • [18]S. Priya, "Modeling of Electric Energy Harvesting Using Piezoelectric Windmill," Appl. Phys. Lett., vol. 87, 2005, pp.184101-184103.
  • [19]Q. Chen and Q.M. Wang, "The Effective Electromechanical Coupling Coefficient of Piezoelectric Thin-Film Resonators," Appl. Phys. Lett., vol. 86, 2005, pp. 022905-022906.
  • [20]H.W. Kim, S. Priya, and K. Uchino, "Modeling of Piezoelectric Energy Harvesting Using Cymbal Transducers," Jpn. J. Appl. Phys., vol. 45, 2006, pp. 5836-5840.
  • [21]M. Renaud et al., "Piezoelectric Harvesters and MEMS Technology: Fabrication, Modeling and Measurements," Proc. Transducers & Eurosensors, 2007, pp. 891-894.
  • [22]http://www.ceracomp.com.
  • [23]J.W. Yi, W.Y. Shih, and W.H. Shih, "Effect of Length, Width, and Mode on the Mass Detection Sensitivity of Piezoelectric Unimorph Cantilevers," J. Appl. Phys., vol. 91, 2003, pp. 1680-1686.
  • [24]S.J. Jeong et al., "Properties of a Multi-Stack Type Piezoelectric Energy Harvesting Device," Integr. Ferroelectr., vol. 98, 2008, pp. 208-215.
  • [25]H.C. Song et al., "Multilayer Piezoelectric Energy Scavenger for Large Current Generation," J. Electroceramics, vol. 23, Oct. 2009, pp. 301-304.
  • [26]N.S. Hudak and G.G. Amatucci, "Small-Scale Energy Harvesting Through Thermoelectric, Vibration, and Radiofrequency Power Conversion," J. Appl. Physics, vol. 103, no. 10, 2008, pp. 101301-24.
  文献评价指标  
  下载次数:22次 浏览次数:34次