Wood-Filled Polyurethane Foam and Modeling Properties of the Heat-Insulating Material Obtained From It

International Multi-Conference on Industrial Engineering and Modern technologies

Saldaev, V.A.^1 ; Storodubtseva, T.N.^2 ; Safin, R.G.^3

Scientific Center for Advanced Energy Technologies, Kazan State Power Engineering University, Krasnoselskaya street 51, Kazan

420066, Russia^1

Department of Industrial Transport, Construction and Geodesy, Voronezh State University of Forestry and Technologies Named after G.F. Morozov, Timirayzeva street 8, Voronezh

394087, Russia^2

Institute of Petroleum and Chemical Engineering, Kazan National Research Technological University, Karl Marks street 68, Kazan

420015, Russia^3

关键词: Continuous production;    Model properties;    Plant operations;    Polyurethane Foam;    Quality parameters;    Thermal conductivity coefficient;    Thermal insulation boards;    Thermal insulation materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/463/4/042044/pdf
DOI  :  10.1088/1757-899X/463/4/042044

来源: IOP

【 摘 要 】

The results of mathematical modeling of physical and mechanical, thermophysical properties of wood polymer thermal insulation material are presented in this article. Modeling is carried out with the aim of predicting the quality parameters of wood polymer thermal insulation material (density, water absorption, flexural and tensile strength, thermal conductivity coefficient) and determining the boundaries of the mode parameters (component consumption, foaming time, conveyor speed, draft intensity in the plate forming units) of plant operation for the continuous production of wood-filled thermal insulation boards.