Influence of the steel rolling direction on the mechanical properties and distribution of the local stress in front crack

5th International Conference Recent Trends in Structural Materials

Pala, R.^1 ; Lipiec, S.^1 ; Dzioba, I.^1

Faculty of Mechatronics and Mechanical Engineering, Department of Machine Design, Kielce University of Technology, Al. 1000-lecia PP 7, Kielce

25-314, Poland^1

关键词: Analysis of local stress;    Local stress;    Power exponent;    Steel rollings;    Strength characteristics;    Ultimate strength;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/461/1/012064/pdf
DOI  :  10.1088/1757-899X/461/1/012064

来源: IOP

【 摘 要 】

In this article presented the results of studies of strength characteristics (yield strength- δy, ultimate strength δuts, power exponent- n) and fracture toughness (JR, JIC) determined on the specimens of steel S235 taken in the rolling and perpendicular direction. Standard strength characteristics are similar for the specimens in both directions. However, there occurs an essential difference in fracture toughness characteristics for the specimens from different directions. To determine (explain) factors that cause this phenomenon performed some metallographic studies and the analysis of local stress and strain distributions in front of the crack.