Determination of forming limits of TWIP steel sheet using linear and nonlinear strain paths

5th International Conference Recent Trends in Structural Materials

Farahnak, P.^1 ; Urbanek, M.^1 ; Rund, M.^1 ; Dzugan, J.^1

COMTES FHT A.s., Prumyslova 995, Dobrany

334 41, Czech Republic^1

关键词: Biaxial loading;    Cruciform specimens;    Forming limit curve;    Mechanical behaviour;    Nonlinear loading;    Nonlinear strain;    Twinning-induced plasticities;    Uniaxial tensile test;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/461/1/012019/pdf
DOI  :  10.1088/1757-899X/461/1/012019

来源: IOP

【 摘 要 】

The main goal of the present paper is investigation of the mechanical behaviour of high manganese content steel sheet which is well known in the literature as Twinning-Induced Plasticity (TWIP) under linear and nonlinear loading path. Contrary to Nakajima experiment, cruciform specimen under biaxial loading can provide linear and nonlinear strain path. This work aims to determine the numerical Forming Limit Curve (FLC) for TWIP sheet using cruciform specimen under biaxial loading. For this purpose, uniaxial tensile tests are performed on standard dog-bone samples which are extracted from rolling, transversal and diagonal directions to identify the flow curve as well as Lankford ratios. Data are used as input for numerical simulation of cruciform specimen. Results show the applicability of cruciform specimen for linear and nonlinear strain paths.