Investigation the surface modification of Polyamide fabrics using Low-Pressure Plasma Technique

18th World Textile Conference

Hassan, Zuhaib^1 ; Atalay, Dr. Ozgur^1 ; Kalaoglu, Prof. Dr. Fatma^1

Faculty of Textile Technologies and Design, Istanbul Technical University, Istanbul

34437, Turkey^1

关键词: Low pressure plasma;    Plasma exposure time;    Plasma techniques;    Plasma treatment;    Radio frequencies;    Surface characteristics;    Textile applications;    The scanning electron microscopes (SEM);   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/460/1/012051/pdf
DOI  :  10.1088/1757-899X/460/1/012051

来源: IOP

【 摘 要 】

Plasma technique can be used to improve the surface characteristics of polyamide fabric with elastane through surface modification. In this study, the Polyamide fabrics with elastane treated with low-temperature, low- pressure, radio frequency argon plasma were investigated. After treated with the Plasma, in order to observe the effect of plasma treatment, fabrics were characterized and examined by the Scanning Electron Microscope (SEM). The changes in surface roughness and etching effect was observed. SEM analyses showed that the surface roughness increased due to the etching effect of the plasma treatment, leading to the improvement of the making the fabric conductive via different coating approaches for E-Textile applications. From the experimental results, it was observed that higher surface roughness can be achieved by the increasing the plasma exposure time. The polyamide fabric with examined at different plasma exposure time 2, 4 and 20 minutes with the argon gas. The obtained samples are promising for making the fabric conductive via different coating approaches for E- Textile applications.