Evaluation of clothing fit

Aegean International Textile and Advanced Engineering Conference 2018

Dabolina, I.^1 ; Silina, L.^1 ; Apse-Apsitis, P.^2

Riga Technical University, Faculty of Material Science and Applied Chemistry, Institute of Design Technologies, Kipsalas street 6-220, Riga

LV-1048, Latvia^1

Riga Technical University, Faculty of Power and Electrical Engineering, Institute of Industrial Electronics and Electrical Engineering, 12/1 Azenes street, Riga

LV-1048, Latvia^2

关键词: Clothing appearances;    Clothing fit;    Clothing pressure;    Human bodies;    Measured values;    Serial production;    Virtual simulations;    Well being;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/459/1/012077/pdf
DOI  :  10.1088/1757-899X/459/1/012077

来源: IOP

【 摘 要 】

This paper focuses on analysis of clothing appearance and fit. Clothing fit ensures human body comfort in terms of microclimate, movements and the body well-being. Garments produced in serial production developed according sizing chart, which is suited to the individual measurements by indifference intervals only. Some, more elaborated systems use drop values. The fit is good for people whose size meets the middle of the table. If the measured values reach the end of the interval, fit is at risk. This is especially important for garments with integrated additional features. Clothing appearance and fit assessment methods are currently well developed - it is possible to assess the individual's 3D look and the distance from the body of the garment. Such an analysis can be done either through virtual simulation or by scanning a real person and/or sample. However, none of aforementioned methods assess the individual's senses in clothing. Therefore, a system is proposed which allows evaluating the analysis of clothing pressure.