Hybrid photoenergy installation development

Aegean International Textile and Advanced Engineering Conference 2018

Zaitsev, R.V.^1 ; Kirichenko, M.V.^1 ; Krypunov, G.S.^1 ; Zaitseva, L.V.^1

Materials for Electronics and Solar Cells Department, National Technical University, Kharkiv Polytechnic Institute, 2 Kirpicheva Street, Kharkiv

61002, Ukraine^1

关键词: Circulating pumps;    Current problems;    Electric energies;    Electronic controls;    Flexible solar cells;    Military consumers;    Solar thermal collector;    Technological solution;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/459/1/012013/pdf
DOI  :  10.1088/1757-899X/459/1/012013

来源: IOP

【 摘 要 】

The current problem is the autonomous supply thermal energy and hot water for civilian and military consumers. The most commonly used for this purpose are installations based on solar thermal collectors, which at the same time require an external power source up to 100 W for electronic control components and a circulating pump, which does not allow them to be fully considered as autonomous. One of the ways to solve this problem is to combine in one installation solar panels and heat collectors. It has been proposed the constructive-technological solution of the hybrid photoenergy system with flexible solar cells based on cadmium telluride, which allows getting the total efficiency of such a system up to 73% for the transformation of solar energy into heat and electric energy.