Study of the technological process parameters basis on a mathematical model

7th International Conference: Modern Technologies For Non-Destructive Testing

Plotnikova, I.V.^1 ; Redko, L.A.^1 ; Chicherina, N.V.^1 ; Efremova, O.N.^1 ; Serebryakov, S.G.^2

Tomsk Polytechnic University, Tomsk, Russia^1

Gubkin Russian State University of Oil and Gas, Moscow, Russia^2

关键词: Controlling operations;    Input and outputs;    Mathematical expressions;    Process parameters;    Production efficiency;    Technological process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/457/1/012021/pdf
DOI  :  10.1088/1757-899X/457/1/012021

来源: IOP

【 摘 要 】

The results of modeling of parameters of technological process are presented in this article. By means of data processing of an experiment the mathematical expressions connecting values of input and output parameters of process are received. On the basis of the regression analysis the system from three equations has been calculated. The check of the constructed model on suitability of application is executed. The received results will allow operating the process parameters so that to minimize the amount of discrepancies in the studied parameter that will lead to increase in production efficiency, decrease in level of marriage, decrease in grade of production, reduction of number of the controlling operations.